Arcaclear Matte finish gives the shiny Arcaclear resin and Arcaclear traffic a matte look.
Arcaclear Matte Finish Advantages:
- Easy to use
- Abrasion resistant
- UV stable
- Non-yellowing and abrasion, alkali and chemical resistant
- Resistant to water and frost
- Gives the surface a matte finish
Arcaclear Matte Finish Used Include:
It is used in combination with Arcaclear resin or Arcaclear traffic, an high-technology waterproof membrane.
ARCACLEAR FINISH is used to obtain a satin-matte finish over ARCACLEAR, a transparent polyurethane waterproofing resin:
- matte finish over ceramic tiles
- matte finish over ARCACLEAR applied over glass, glass bricks
- matte finish over ARCACLEAR applied over swimming pool mosaics
- matte finish over ARCACLEAR applied over terrace tiles
Coverage
- Approximately 50-150 gr/m² in one or two coats.
- 1kg will cover up to 20m² (sqm) for 1 to 2 coats.
Arcaclear Matte Finish Colour:
- Transparent (provide a matte finish to the support)
Arcaclear Matte Finish Pack Sizes:
Arcaclear Matte Finish comes in 1kg packs.
It can be ordered alone or in a kit providing complete TRANSPARENT WATERPROOFING treatment (from priming to finish).
The ARCACLEAR system is packaged to treat 5m² (approximately 50 square feet) or 10m2 (approximately 100 square feet) per kit.
Four types of kits are available depending on the frequency and quantity of foot traffic to which the surface will be subjected.
- No foot traffic (used over mosaics or tiling in swimming pool or on wall surfaces)
- Rare foot traffic for maintenance purposes only
- Frequent foot traffic within a private property
- Frequent and heavy foot traffic in public areas
When ordering, click on the type of foot traffic to which the surface will be subjected, choose the surface area you wish to cover (5 or 10 m²), the primer adapted to your surface (porous or non porous) and the look you wish to achieve (shiny or matte). Your kit will be composed of the components you need to cover your surface area.
Do you want to order each product separately?
Arcaclear Finish is a mono-component transparent polyrethane coating used over Arcaclear resin or Arcaclear traffic resin to obtain a matte finish.
Arcaclear Matte Finish Benefits:
- Easy to use
- Abrasion resistant
- UV stable
- Non-yellowing
- Resistant to water and frost
- Gives the surface a matte finish
Instructions for use ARCACLEAR FINISH:
Application conditions
- Do not apply if it is raining or snowing or if rain or snow are forecast with a 48-hour delay.
- The moisture content of the surface must not exceed 5%.
- For best results, the temperature during application should be between 5°C and 35°C and relative humidity should be between 50 and 70%.
Application
Apply ARCACLEAR FINISH over a surface treated with ARCACLEAR using a roller, until the surface area is completely covered. If the surface is destined to have very frequent foot traffic, a thicker layer of ARCACLEAR FINISH may be applied but do not apply a 2nd layer.
IMPORTANT:
ARCACLEAR FINISH is a transparent polyurethane coating which will leave your surface treated with ARCACLEAR with a matte finish. To obtain the matte finish, respect a coverage rate of 0,1 kg/m² . The last coat of ARCACLEAR must have dried a minimum 12 hours and a maximum of 18 hours before applying ARCACLEAR FINISH Apply with a roller or tooth or serrated trowel
The ARCACLEAR FINISH will cure well under normal climatic conditions (5-35° C, dry weather). Lower temperatures will slow down curing time and higher temperatures will accelerate the curing time. Purchase in a pre-packaged kit with components and quantities to prime, waterproof and add a matte finish (The kit comes in 2 sizes to cover a surface area of 5m² or 10m2).
Caution:
ARCACLEAR FINISH (and ARCACLEAR) are slippery when wet. An anti-slip surface may be created by sprinkling aggregates onto the still wet coating.
Drying time
2 to 6 hours
Coverage
- Approximately 50-150 gr/m² in one or two coats.
- 1kg will cover up to 20m² (sqm) for 1 to 2 coats.
This coverage is based on application by roller onto a smooth surface in optimum conditions. Depending on the surface and conditions, the coverage rate may vary.
Storage Can be stored in dry and cool rooms for up to 9 months.
Protect the material against moisture and direct sunlight. Storage temperature: 5-30oC. Products should remain in their original, unopened
containers, bearing the manufacturers name, product designation, batch number and application precaution labels.keep 1 year in original unopened packaging
Coverage
- Approximately 50-150 gr/m² in one or two coats.
- 1kg will cover up to 20m² (sqm) for 1 to 2 coats.
