One of the most resistant acrylic swimming pool paint - Last twice longer*
REFRESH - ENHANCE - PROTECT
Arcapool Swimming Pool Paint is a protective and decorative waterproof paint coating for all in-ground masonry swimming pools, pond.
Arcapool Swimming Pool and Pond Paint Advantages:
- Highest standard, performance and resistance
- Acrylic resin based new formula designed for underwater use in salt or fresh water and may be used over previously applied pool paints
- Excellent water resistance
- Resists UV damage and pool chemicals for lasting color and durability (Fade Resistant)
- Mildew, alkali and acid resistant.
- Self priming on all properly prepared masonry pool surfaces
- Resists the cracking, crazing, peeling and chipping induced by the constant stress on the pool
- Refreshes, enhances and protects your pool
- Easily cleaned of surface contaminants
- A refresher coat of ARCAPOOL can be applied without eliminating the older coating of our product Arcapool if in a good condition.
This decorative swimming pool paint will restore, beautify and render your pool water resistant.
Water Based Acrylic Paint VS Arcapool Resin Based Acrylic Paint:
One of the main difference: Arcapool Resin Based Paint have an incomparable resistance compare to all water based acrylic paint (will last twice longer!)
A better adherence, stronger UV resistance.
Arcapool Swimming Pool and Pond Paint : where to apply ?
Arcapool Swimming Pool Paint is used for all in-ground masonry swimming pools, pond.
Can be applied on cement and concrete and over cement-based waterproofing coatings (such Arcacem, Arcacem S2.)
Can also be apply on plaster surfaces.
Do not apply on an old paint, remove the old paint by sanding or sandblasting and clean carefully before applying Arcapool.
- Swimming Pools
- Ponds, Basins
- Spas, Hammams
- Fish Pond
Arcapool Swimming Pool and Pond Paint Colour:
- Available in 3 standard colours - white, blue and grey.
- Arcapool can be supplied in any RAL colour of your choice for a minimum order of 10 litres
If you wish to order a tint not present on our colour chart, select : "specifcy your color needed (Ral to be confirmed)" to send us an e-mail with your choice of RAL tint.
Arcapool Swimming Pool and Pond Paint Pack Sizes:
2 sizes : 2.5L (4 colours only) - 10L (all colours)
Arcapool Swimming Pool and Pond Paint Additional Product:
Often used with ARCAFIX
Arcafix waterproofs, hardens and renovates porous substrates prone to disintegration, crumbling and/or powdering and renders the surface perfectly adhesive to paint, plaster or stucco topcoats.
* compare to all traditional water based Acrylic pool paint
ARCAPOOL SWIMMING POOL PAINT INSTRUCTIONS FOR USE
Application conditions
Avoid applying in very hot, windy or humid weather conditions.
Cement must have dried for at least 60 days.
Do not apply if the support or subtrate moisture content exceeds 5 % Avoid period with high amplitude of temperature variation
Arcapool Swimming Pool and Pond Paint Surface preparation:
The performance of the swimming pool paint depends on careful and thorough surface preparation.
The surface to be painted must be sound. Make any repairs to cracks or anything with your choice of caulk, cement, or other products.
- The pool must be drained and dried carefully
- All debris must be eliminated
- Old loose paint must be scraped off completely
- Eliminate moss and algae with ARCAMOSS
- A hydrochloric acid solution (1L for 6 to 8 litres water) should be used to remove any laitance and the surface must be completely cleaned near the waterline to eliminate tanning oil deposits and other contaminants. Use high pressure (100 bars) material. Rinse and let dry thoroughly.
- ARCAPOOL must be applied on a completely dry surface. (less than 5% moisture content).
Arcapool Swimming Pool and Pond Paint Application:
It is best to apply ARCAPOOL in the early morning when the temperature is cooler and moisture levels are at their lowest.
Apply with a roller (and paint brush for difficult areas). Use an extension pole on your roller for the deep end walls.
Apply a primer coat 90% ARCAPOOL 10% white spirit. Let dry 24 h.
Apply a 2nd coat of undiluted ARCAPOOL.
Arcapool Swimming Pool and Pond Paint Drying Time:
Between coats: 24 hours
In optimal conditions, allow ARCAPOOL to dry 7 days before refilling the pool. (We always recommend 14 days)
Arcapool Swimming Pool and Pond Paint Clean Up:
Clean application tools with white spirit immediately after use.
Arcapool Swimming Pool and Pond Paint Coverage:
An average of 3 to 4m2 per litre (for the two coats)
2.5L will cover 10 sqm (m²)
10L will cover up to 40 sqm (m²)
Example: You will need 40 litres to repaint a swimming pool 160m2
10 litres ARCAPOOL will cover about 40 square metres with two coats.
Arcapool Swimming Pool and Pond Paint Storage:
Store ARCAPOOL in dry, cool and frost free conditions. Shelf life is 12 months.
