Ultimate Water AND Oil repellent completely invisible does not alter the support.
ARCAREPEL WATER AND OIL REPELLENT is a water and oil repellent product designed to protect the surface from damage caused by water leaking, oil and grease spillage.
Advantages
- Water AND Oil repellent: Highly efficient Stain repellent, arcarepel blocks the penetration of all greasy stains.
- Water and oil will pearl up and not penetrate a surface treated with ARCAREPEL.
- Odourless
- Invisible, will not change the appearance or colour of the surface
- Non film-forming, allowing the treated material to breathe
- Ready to Use and easy to apply to any porous surface, indoor or outdoor, on horizontal or vertical surfaces
- Keeps the substrate dry and thus protected from cracking due to freezing ( renders your surface resistant to cracking caused by freezing temperatures. )
- Renders the surface self-cleaning while protecting it from damage caused by water, oil, weather and moss growth.
- Inhibits fungal and moss growth
- Can be covered with paint or varnish
Where to use ?
ARCAREPEL WATER AND OIL REPELLENT will protect from water and oil ingress:
- sound porous tiling,
- paving,
- flagstone surfaces,
- tiling,
- brick,
- concrete,
- slate,
- terracotta,
- interlocking paving stone
Water, oil and stain repellent, ARCAREPEL is particularly ideal to protect the surfaces of :
- Outdoor terraces
- Outdoor paving stones
- Garage flooring
Outdoor paving stones: ARCAREPEL WATER AND OIL REPELLENT keeps the substrate dry and thus protected from cracking due to freezing.
Arcarepel Water And Oil Repellent Pack Sizes:
3 pack sizes available:1L - 5L - 20L
Arcarepel Water And Oil Repellent Aditionnal Products:
If you only need a water repellent with no Oil repellent effect save money and used ARCABLOCK
If you need to protect your wood surfaces used: ARCAWOOD (specially made for all kind of wood surfaces)
Application Conditions
Do not apply on a wet surface. Surface has to be very dry and porous.
Do not store in temperatures of less than 5°C
Do not apply in raining, snowing or windy weather conditions or if temperature exceeds 35°C.
Surface Preparation
ARCAREPEL must be applied on sound, clean and dry surfaces.
All fungal growth, moss and algae must be eliminated with ARCAMOSS before applying.
Application
Ready to use, ARCAREPEL can be applied by brush, roller.
The surface to be treated must be thoroughly saturated with ARCAREPEL. Apply until the surface no longer absorbs product in a one-time application of the entire surface (depending on the porosity of the surface, more or less product will be used). Do not create excess build-up of product by going over an area already saturated. Let dry and wait 24 hours between applications if a second application is necessary.
Note: Oil and water will pearl up on the surface and should be wiped off following the spill. They should not be left to penetrate the surface (which they will do over time).
Drying Time
at 20°C: 8 hours
For re-application: 24 hours
Optimum performance reached after 7 days.
Clean Up
Promptly clean hand and all tools with water.
4 to 8 m2 / L - coverage will vary depending on surface texture and porosity.
- 1L will cover up to 8m²
- 5L will cover up to 40m²
- 20L will cover up to 160m²
Shelf life: 1 year unopened in a dry, cool place, keep away from frost or high temperatures.
