Rust prevention and protection paint, rust proofing product that will transform your rusted surface within minutes and into a paintable surface.
Don't remove rust, convert rust!
ARCARUST RUST CONVERTER... the ultimate solution to rust and corrosion.
ARCARUST is a unique rust converter which provides rust protection, rust prevention and rust proofing on all metallic surfaces subject to oxidation.
Rust preventive and curative, ARCARUST works on all ferrous materials subject to oxidation and rusting leaving a durable, resistant and protective black coat.
The tannic acid reacts with rust and chemically converts it to iron tannate, a dark-colored stable material. Arcarust also provides a protective primer layer. The overall chemical reaction converts rust into a stable, black protective coating.
Advantages
- Visible results within 15 minutes on all surfaces subject to oxidation, indoors or outdoors
- Penetrates 10 times faster than other brands
- Ready to use and easy to apply (just apply to transform the rust)
- Can be covered with any type of paint (including epoxy resins and solvant based polyurethanes) once dry
- Treats all type of ferrous metals: steel, wrought iron, galvanized steel, tinplate (compatible with most topcoats)
Where to apply?
Removes corrosion and provides long term protection on:
- Household uses include: Courtyard and garden gates, decorative screens, pet housing, iron fences, wrought iron furniture, garden tools, trailers, mailbox, storage sheds, lawnmowers, wrought iron furniture & railings, refrigerators, cooking ranges, stoves...
- Automotive uses include: Car chassis, automotive restoration,utility trailers, ramps, floorboards...
- Marine uses include: ships, boat trailers, ferriers, shipping containers...
- Industrial uses include:manufacturing equipment, fencing and gates, pipes, storage & fuel tanks...
In just 15 minutes, ARCARUST achieves visible results when applied to all type of ferrous metals: steel, wrought iron, galvanized steel, tinplate, etc. ARCARUST coverts rust into a stable, protective black coating which funtions as a primer for subsequent coatings.
3 pack sizes available: 1L, 5L and 20 L
Rust converter transforms rust into a protective anti-corrosion coating. Arcarust stops residual rust, and turns it into a black, protective, ready-to-paint coating, without sanding.
Application Conditions
Limit application temperatures : + 5°C to + 35°C.
Surface Preparation
Optimum performance is achieved by using the right combination of products, surface preparation and application procedures. Careful attention to the preparation of the surface is essential:
• Surfaces to be coated must be degreased and free from all dust and contamination or loose particles.
• Rusted and coated steel and metal: Remove loose scale, flaky rust, old paint and dirt with wire brush
Application
New steel and metal surfaces : apply one coat of ARCARUST
Old rusted steel and metal surfaces : apply one or two coats of ARCARUST
lf the coated surface is not uniform in colour, a 2nd application of product is necessary. Wait 1 hour and recoat to achieve a uniform black coating over the entire surface.
IMPORTANT: After use, do not pour left over product back into the ARCARUST container (which may neutralize the effect of ARCARUST by introducing rust particles into the product.
Drying time:
Drying time at 20°C : Dust free : 30 minutes
Dry and hard : 24 hours
Recoatable : 24 hours
Clean Up:
Tools should be cleaned with water immediately after use.
Approximately 10m² for 1 litre of product
- 1L will cover up to: 10m²
- 5L will cover up to: 50m²
- 20L will cover up to: 100m²
Store in dry, cool, well-ventilated and frost free conditions. Shelf life is 12 months. Keep away from direct sun or any source of heat or flames.
