ARCASPHALT is an acrylic elastomer paint dedicated to cover asphalt.
You wish to restore your asphalt or to change its color? You want to bound a zone on your asphalt ground ?
Paint formulated specifically for asphalts, ARCASPHALT is an acrylic elastomer adapted to the bituminous coated and to the asphalt.
ADVANTAGES OF ARCASPHALT
- High opacity
- Waterproof & Soft membrane
- Easy to apply
- Long durability
- UV resistant
- Water resistant
- Anti-slip & anti-refective
Where to apply ?
- private alleys,
- bike path
- private car parks
- playgrounds
- garages
- ground signage
- floor decorating
Decorative and highly resistant, ARCASPHALT paint can also also be used to build, refresh or restore the surface on sporting grounds in schools, playgrounds or private alleys which require resistance to abrasion and anti-slip, anti-skid features.
IMPORTANT: Arcasphalt is meant for a private use and cannot be applied on public parking surfaces.
Main materials on which it can be used
ARCASPHALT paint is highly resistant and can be used on all sorts of porous ground surfaces:
- asphalt,
- cement,
- concrete etc...
Do not apply on chalky, dusty, flaky surfaces. If the surface is lightly chalky or friable we recommend to apply first a mineralizing product to make the surface coherent.
Available in 2 pack sizezs: 2.5L and 25kg
NOTE: Please note that Arcasphalt and Arcatennis are the same product. They have been separated to meet internet positioning requirements.
Tool
12 -15 mm woven polyamide roller, roller frame.
Surface preparation
Pay careful attention to the surface preparation instructions and recommendations in order to guarantee proper adhesion of the product to the surface.
On old surfaces, loose dirt and debris must be removed from the surface either by brushing, scraping or by using a small pressure washer.
On new surfaces ARCASPHALT can be applied directly .
The surface must be completely dry before application.
APPLICATION
ARCASPHALT can be brushed, roller or sprayed on a clean dry surface.
Apply two coats.
1st coat: Dilute ARCASPHALT with 10 - 15% water. Let dry 24 hours
2nd coat: Dilute ARCASPHALT with 5 - 10% water.
** If using an airless sprayer, dilute with 15% water.
Let dry 48 hours before using the surface.
DRYING :
To touch: 2 to 3 hours
To re-coat: 24 hours
For foot traffic: 48 hours after application of last coat.
TOOL CLEANING
Clean application tools with water immediately after use.
We recommend to apply 2 coats or more of ARCASPHALT.
0.25 to 0.35KG / M2 per coat depending on the porosity of the surface. It means from 0.5 to 0.7 kg per m² for 2 coats.
3.75KG : up to 7.5m² in 2 coats
25KG up to 50m² in 2 coats.
Will keep 1 year stored in unopened containers in a clean, dry area. Once opened, can be kept for up to 2 months.
Keep material from freezing.
