HIGHPROTECT - Highest protection Bi-component Varnish for beton cire, decorative concrete, waterproof, anti stains

ARCANE INDUSTRIES

Ref : p-3700043412200

16,50 £ tax incl.

HIGHPROTECT - Highest protection Bi-component Varnish for beton cire, decorative concrete, waterproof, anti stains

Ref : 3700043412200
Poids :

HIGHPROTECT is the highest protection two-component Varnish for beton cire, decorative concrete, waterproof, anti stains.

> See full description

Departure within 24 hours
Direct Prices from our factory
Loyalty program
All products in stock
Made In France

HighProtect is a water-based polyurethane varnish meant to protect microcement Arcascreed, wood, cement screed. Highprotect is a strong, durable and resistant two component varnish. It is normally used after one coat of pore filler.

ADVANTAGES

100% Waterproof
interior / exterior
Intense foot traffic resistant
UV resistant
water-based (= non toxic, can be used in interiors)
quick drying
does not yellow
Facilitates maintenance and increase strength
Hardwearing, highly resistant to stains, detergeant, water, abrasion, hot oil, grease, fat and acid
Light satin finish

Available in kits:

kit 2 m² : 208 g base - 42 g hardener,
kit 5 m² : 417 g base - 83 g hardener,
kit 10 m² : 833 g base - 167 g hardenerr,
kit 25 m² : 2.082 kg base - 418 g hardener,
kit 50 m² : 4.164 kg base - 836 g hardener.

Where to apply Highprotect varnish?

This applies is mainly use for domestic and professional use galleries, homes, shops, showroom, office buildings, restaurants:

floors,
walls
countertops
shower trays

in kitchens, bathrooms, wetrooms floors & walls.

SUITABLE MATERIALS

Concrete
Microcement, Béton ciré
Wood,
Bricks,
Tiles,
Plaster,
Metal,
Porous paint.

NOTE: on most materials (porous) it will be necessary to apply one layer of pore filler in order to facilitate the application of the varnish and avoid roller marks.

How to apply the varnish?

Tools

Roller, spalter brush. Clean tools with water

Surface preparation

The surface must be dry, clean, sound, and free of loose or friable materials. If the surface is porous, apply one coat of pore filler and let dry 24h. If the surface is not porous, you can apply the varnish directly, in that case make sure that it is dry, clean and non greasy.

Mix component A (base). Incorporate the varnish hardener in the base in a proportion of : 5 weight for 1 weight of hardener. Leave the mixture for 2 mn and mix again before application.

example : 50g component A base + 10 g component B hardener

Prepare mix only for one coat.

1kg of the mixture = 20m² for 1 coat / 10m² for 2 coats

Apply one thin layer and let dry from 12 to 24h
Apply a second thin layer and let dry 12h if you need a 3rd coat
Drying time per coat: 12 hours
Mass lifetime of the mixture: 2 hours

IMPORTANT: we recommend to apply 3 or 4 coats of Highprotect varnish on public places floors, on kitchen floors or countertops and shower trays.

Drying time

dust free: 2 hours
between coats: 12-24 h
dry to the touch: 6 hours
Curing time : 7 days : avoid any contact with water or grease during this period.

1 kg mix allows to cover 10 m² (for 2 coats).

12 months in a cool and dry place. Keep material from freezing and heat.

Documents joints

HOW TO USE MANUAL

Download

Data sheets (coming soon)

Download

Demande de FDS

Mentions Légales :

‹ › ×

Our Tips & Last photos

We did not upload photos or articles for this item