Hydrostop mono-component polyurethane varnish for beton cire

Hydrostop offers an excellent protection ideal for showers/ bathrooms walls

• Waterproof on walls
• Ready to use
• Easy to clean
• Aqueous phase (= non toxic, can be used in interiors)
• Facilitate maintenance and increase strength
• Hardwearing, resistant to stains, detergeant, abrasion.

If your are looking for a varnish highly resistant to : water standing, hot oil, grease, fat and acid use: Highprotect Varnish

Where to apply Hydrostop varnish?

This applies for bathrooms, wetrooms walls

You can apply on Wood, Concrete, Béton ciré, Brick, Tile,Plaster, Metal, Porous paint.

How to apply the varnish?

• Shake the tin prior to use
• 1 liter = 20m² for 1 coat / 10m² for 2 coats
• Apply 2 coats after pore fillers
• Drying time per coat: 1 hour
• Clean tools with water
• Waterlogging / exterior/ intense foot traffic: use Highprotect varnish
• For walls
• Matte finish

HYDROSTOP is a Varnish that offers an excellent protection for showers / bathrooms walls

Hydrostop offers an excellent protection ideal for showers/ bathrooms walls

• Waterproof on walls
• Ready to use
• Easy to clean
• Aqueous phase (= non toxic, can be used in interiors)
• Facilitate maintenance and increase strength
• Hardwearing, resistant to stains, detergeant, abrasion.

If your are looking for a varnish highly resistant to : water standing, hot oil, grease, fat and acid use: Highprotect Varnish